Here at Bubblebee Industries we are very serious about testing. We test all our products thoroughly to ensure that you get the best quality sound tools available for your microphones. Check out the results of frequency and wind reduction tests we had done on our Windbubbles by Delta Technical-Audiological Laboratory in Denmark below.
This attention to quality and detail extends to all our products including our hypoallergenic tested tape and ensures that all our products acheive CE certification. To add an extra layer of protection for Bubblebee customers, we operate a return-to-base manufacturer warranty of 2 years on all our products.
Our Windbubbles have been thoroughly tested by DELTA:
Frequency Response BBI-L01/-L02/-L03/-L04:
Tests are made with BBI-L01, Sanken COS-11 (without metal windscreen), BBI-L02, Sanken COS-11 (with metal windscreen), BBI-L03, Sanken COS-11 (with metal windscreen), BBI-L04 and Sanken COS-11 (with large metal windscreen).
Download the Bubblebee Windbubbles measurements test results here.
Windshield effect for BBI-L01/-L02/-L03/-L04:
The Wind shielding effect in a wind tunnel shows a notable positive effect of The Windbubbles. Low frequency noise usually caused by wind in the area 20-200 Hz is reduced up to 35 dB. All measurements are made in direct turbulent air, as it occurs in nature.
Tests are made with BBI-L01, Sanken COS-11 (without metal windscreen), BBI-L02, Sanken COS-11 (with metal windscreen), BBI-L03, Sanken COS-11 (with metal windscreen), BBI-L04 and Sanken COS-11 (with large metal windscreen).
Download the Bubblebee Windbubbles Windjammer test results here.
Warranty Information
Bubblebee Industries warranty
All Bubblebee products are covered by a limited manufacturer warranty for 2 years. Download the Bubblebee Industries 2 year limited warranty here.