The Lav Concealer Tips - 2: Applying the Tape


The Bubblebee Lav Concealer is here and designed to tackle all the serious wire mic issues you have to face as a sound mixer - vibration, fabric noise and adaptability for secure fitting. Find out more about what's possible with this ingenious sound tool here. We have compiled a series of tips on how to use it correctly and get the best results. Here's the second in the series - how to apply The Lav Concealer Tape to The Lav Concealer:

Step 1:

Grab a piece of The Lav Concealer Tape using the handy dispenser box, or the thumb tab, to pull it off the backing tape.

Step 2:

Line the piece of tape up with the Lav Concealer with the microphone already fitted, so that the little square recess is where the grid of the mic is positioned and press firmly onto the back surface of The Lav Concealer.

Step 3:

Remove the backing paper using the thumb tab and position the Lav Concealer directly on the skin. Press firmly into place and let it set for 5 - 10 seconds for the strongest bond.


We hope this short guide helps. View all our guides here.

For more assistance please contact your local Bubblebee Dealer, and failing that, drop us a line with a question via our contact page.



Back to the top